Linux version 2.4.20 (root@darkstar) (gcc version 2.95.3 20010315 (release)) #11 SMP Mon Jun 30 02:46:56 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f2798 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000001000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff2798 - 0000000100000000 (reserved) 16MB LOWMEM available. ACPI: have wakeup address 0xc0002000 found SMP MP-table at 000fdbc0 hm, page 000fd000 reserved twice. hm, page 000fe000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ALR Product ID: Revol. 6X6 APIC at: 0xFEE00000 Processor #6 Pentium(tm) Pro APIC version 17 Processor #1 Pentium(tm) Pro APIC version 17 Processor #2 Pentium(tm) Pro APIC version 17 Processor #5 Pentium(tm) Pro APIC version 17 I/O APIC #0 Version 17 at 0xFEC00000. Processors: 4 Kernel command line: auto BOOT_IMAGE=Linusik ro root=802 Initializing CPU#0 Detected 200.005 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 398.95 BogoMIPS Memory: 13336k/16384k available (1392k kernel code, 2660k reserved, 519k data, 128k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0000fbff 00000000 00000000 00000000 CPU: Common caps: 0000fbff 00000000 00000000 00000000 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0000fbff 00000000 00000000 00000000 CPU: Common caps: 0000fbff 00000000 00000000 00000000 CPU0: Intel Pentium Pro stepping 07 per-CPU timeslice cutoff: 1460.51 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 399.76 BogoMIPS CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0000fbff 00000000 00000000 00000000 CPU: Common caps: 0000fbff 00000000 00000000 00000000 CPU1: Intel Pentium Pro stepping 07 Booting processor 2/2 eip 3000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 399.76 BogoMIPS CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#2. CPU: After generic, caps: 0000fbff 00000000 00000000 00000000 CPU: Common caps: 0000fbff 00000000 00000000 00000000 CPU2: Intel Pentium Pro stepping 07 Booting processor 3/5 eip 3000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 399.76 BogoMIPS CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#3. CPU: After generic, caps: 0000fbff 00000000 00000000 00000000 CPU: Common caps: 0000fbff 00000000 00000000 00000000 CPU3: Intel Pentium Pro stepping 07 Total of 4 processors activated (1598.25 BogoMIPS). ENABLING IO-APIC IRQs Setting 0 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 0 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 0-0 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #0 registers: 16. testing the IO APIC....................... IO APIC #0...... .... register #00: 00000000 ....... : physical APIC id: 00 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 00F 0F 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 00F 0F 0 0 0 0 0 1 1 51 06 00F 0F 0 0 0 0 0 1 1 59 07 00F 0F 0 0 0 0 0 1 1 61 08 00F 0F 0 0 0 0 0 1 1 69 09 00F 0F 1 1 0 0 0 1 1 71 0a 00F 0F 0 0 0 0 0 1 1 79 0b 00F 0F 1 1 0 0 0 1 1 81 0c 00F 0F 0 0 0 0 0 1 1 89 0d 00F 0F 0 0 0 0 0 1 1 91 0e 00F 0F 0 0 0 0 0 1 1 99 0f 00F 0F 0 0 0 0 0 1 1 A1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 199.9942 MHz. ..... host bus clock speed is 66.6644 MHz. cpu: 0, clocks: 666644, slice: 133328 CPU0 cpu: 3, clocks: 666644, slice: 133328 cpu: 1, clocks: 666644, slice: 133328 cpu: 2, clocks: 666644, slice: 133328 CPU1 CPU3 CPU2 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0xe) All processors have done init_idle ACPI: Subsystem revision 20021212 PCI: PCI BIOS revision 2.10 entry at 0xf8160, last bus=1 PCI: Using configuration type 1 ACPI: System description tables not found ACPI-0066: *** Error: Acpi_load_tables: Could not get RSDP, AE_NOT_FOUND ACPI-0116: *** Error: Acpi_load_tables: Could not load tables: AE_NOT_FOUND ACPI: Unable to load the System Description Tables PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: i440KX/GX host bridge 00:19.0: secondary bus 00 PCI: i440KX/GX host bridge 00:1a.0: secondary bus 01 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 atyfb: mach64VTA4 (ATI264VT) [0x5654 rev 0x40] 2M EDO, 14.31818 MHz XTAL, 200 MHz PLL, 63 Mhz MCLK Console: switching to colour frame buffer device 80x25 fb0: ATY Mach64 frame buffer device on PCI Detected PS/2 Mouse Port. pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Non-volatile memory driver v1.2 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx W82C105: ignored by ide_scan_pci_device() (uses own driver) hda: IRQ probe failed (0xfffffef8) hda: IRQ probe failed (0xfffffef8) hdb: IRQ probe failed (0xfffffef8) hdb: IRQ probe failed (0xfffffef8) hdc: HITACHI CDR-7730, ATAPI CD/DVD-ROM drive hdd: no response (status = 0x80), resetting drive hdd: no response (status = 0x80) ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 4X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs Vendor: IBM Model: DDRS-39130D Rev: DC1B Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 8 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 128k freed Adding Swap: 132072k swap-space (priority -1) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 01:0f.0: 3Com PCI 3c905C Tornado at 0xf480. Vers LK1.1.16